Table of Contents
  

-Home

-Fuller's
  Racing
  Hardware &
  accessories

- Fuller's
  Precision
  Hardware

-Motor
  Accessories

-Battery
  Accessories

-Boat Setups

-Scratch and
  Dent

-Contact Us

-Links

-Orders
  Outside the
  USA and
  Canada

view.gif (2089 bytes)
check.gif (2117 bytes)

Please rate this site
at The Hottest
25 R/C Sites

mastercardlogo.gif (1500 bytes)

visalogo.gif (420 bytes)

-Shipping
  information
-Warranty policy
-Return Policy

Fuller's Fast Electrics

ffetplt.gif (913 bytes)

.

 ffetprt.gif (917 bytes)

.

Hardware Kits

Fuller's Hardware has been found on the fastest boats in the country year after year. These are some of the most innovative designs for fast electric model boats in the world. Each set seems as though it was custom made for your boat. Fuller's hardware comes with all stainless steel fasteners.

Hydro Hardware

.
  Fuller's Original Hydro Hardware comes with a fully adjustable strut and bracket, standard wedge rudder or water pickup wedge rudder and mount, flex shaft, teflon liner, and fasteners. Prop not included.  
.
Fuller's Original Hydro Hardware (1/8 shaft)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
Fuller's Original Hydro Hardware (3/16 shaft)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
.
.
.
Fuller's Next Generation 6-12 cell hydro hardware comes with a fully adjustable standard strut and bracket, standard wedge rudder or water pickup wedge rudder and mount, flex shaft, teflon liner, and fasteners. Prop not included.
.
Next Generation Hydro (1/8 prop size)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
Next Generation Hydro (3/16 prop size)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
.
. Carbon Fiber Outboard Lower Unit. This lower unit is designed for a 3.5 Nitro engine but is easily adapted for Electric use with our electric motor adaptor, Perfect for a 3.5 nitro to electric conversion.
Available as a complete assembly, or as individual components.		 .
.
Carbon Fiber Outboard Lower Unit Complete
and ready for your motor: Price:  89.95
Carbon Fiber Outboard Lower Unit - Leg only
Price: 31.95
Stub shaft with nut and bearings and screw
mount --- Price: 22.95
Flex shaft
Price: 6.50		  
Transom mount hinge plate
Price: 8.95
Transom mount hinge pin
Price: 4.50
Electric motor conversion plate --- Price: $15.00
5mm Motor to Outboard Flex Shaft Coupler
Price: $15.00
.
.
.
ffebtlt.gif (916 bytes)

.

 ffebtrt.gif (911 bytes)
ffetplt.gif (913 bytes)

.

 ffetprt.gif (917 bytes)

.

Mono Hardware

.
 

Mono Stinger Drive
This is a complete drive unit
  • stinger strut
  • square drive stub shaft
  • square drive flex shaft
  • Teflon tube and brass tube
  • drive dog s/s
  • prop bullet s/s
  • 5mmx 187 coupler s/s
  • Teflon washer
 		  
.
Mono Stinger Drive: $79.95
.
  Fuller's Original Mono Hardware comes with a fully adjustable strut and bracket, water pickup wedge rudder and mount, flex shaft, teflon liner, and fasteners. Prop not included.  
.
Fuller's Original Mono Hardware (1/8 prop)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
Fuller's Original Mono Hardware (3/16 prop)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
.
  Fuller's Super 12 Cell Mono Hardware comes complete with  turn fin, adjustable strut, adjustable rudder bracket, water pickup swept wedge rudder, .125 flex shaft, teflon tube, and screw adjustable trim tabs. Prop not included.  
.
Fuller's Super 12 Cell Mono Hardware. Price: $120.00
.
  Fuller's Super 6/8 cell Mono Hardware comes complete with  turn fin, adjustable strut, adjustable rudder bracket, water pickup swept wedge rudder, .125 flex shaft, teflon tube, and screw adjustable trim tabs. Prop not included.  
.
Fuller's Super 6/8 Cell Mono Hardware. (3/16th shaft) Price: $120.00
Fuller's Super 6/8 Cell Mono Hardware. (1/8th shaft) Price: $120.00
.
  Fuller's Next Generation 6-12 cell mono hardware comes with a fully adjustable standard strut and bracket, water pickup wedge rudder and mount, flex shaft, teflon liner, and fasteners. Prop not included.  
.
Next Generation Mono (1/8 prop size)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
Next Generation Mono (3/16 prop size)
With standard wedge rudder: $92.95
With water pickup wedge rudder: $95.95
.
  Fullers 2 way adjustable  Aluminum trim tabs. These tabs are perfect for dialing in any mono. No more bending the corners down on your one way adjustable tabs. Just turn the screw down on the side of the tab you want lower!  
Fullers 2 way adjustable Aluminum trim tabs:
Price: $22.50 pair
 
 
ffebtlt.gif (916 bytes)

 

 ffebtrt.gif (911 bytes)
ffetplt.gif (913 bytes)

.

 ffetprt.gif (917 bytes)

.

Offshore Hardware

.
   
   
 
Fuller's Offshore Catamaran Hardware. comes with a fully adjustable heavy duty strut and bracket, water pickup wedge rudder and mount, .125 flex shaft with 3/16ths stub shaft flex shaft, teflon liner, and fasteners.
Fuller's Offshore Cat Hardware. Price: $99.95
 
  Fullers 2 way adjustable  Aluminum trim tabs. These tabs are perfect for dialing in any mono. No more bending the corners down on your one way adjustable tabs. Just turn the screw down on the side of the tab you want lower!  
Fullers 2 way adjustable Aluminum trim tabs:
Price: $22.50 pair
 
 
ffebtlt.gif (916 bytes)

.

 ffebtrt.gif (911 bytes)
ffetplt.gif (913 bytes)

.

 ffetprt.gif (917 bytes)

.

.
   
   
  NEW - Fuller's Micro Hardware.

Comes with your choice of strut with skeg or strut without skeg.
Shaft not included.

  
.
Micro Hardware: $59.95
.
ffebtlt.gif (916 bytes)

.

 ffebtrt.gif (911 bytes)
ffetplt.gif (913 bytes)

.

 ffetprt.gif (917 bytes)
.

Accessories
.
.
3.25 rudder bracket extension
$11.95
3 1/4 inch HV super strut bracket
$24.95
2 inch HV super strut bracket
$22.95
NEW - Super strut bracket - 1" long
 $20.00
12 - 32 cell super strut - 1 7/8" length strut for .130 cable and 3/16ths stub shaft bearing surface: $23.00 (bracket not included)
12 - 32 cell super strut - 1 7/8" length strut for .150 cable and 3/16ths stub shaft bearing surface: $23.00 (bracket not included)
12 - 32 cell long super strut - 2 1/2 long length strut for .130 cable and 3/16ths stub shaft bearing surface: $23.00
12 - 32 cell long super strut - 2 1/2 long length strut for .150 cable and 3/16ths stub shaft bearing surface: $23.00
shortstrutbracket.gif (3469 bytes) Standard strut bracket - short: $15.00
fullerstrut.gif (4676 bytes) 4- 12 cell standard strut - for .130 cable and 3/16ths stub shaft bearing surface: $19.95
fullerstrut.gif (4676 bytes) 4- 12 cell standard strut - for .150 cable and 3/16ths stub shaft bearing surface: $19.95
Rudder arm bracket: $20.00
NEW - Kick-up rudder bracket and base. With hole for rubber boot, adjusts in or out, 2 piece unit: $24.95
*rudder, boot and tiller arm for illustration, not included
Straight rudder bracket to be used with fullers standard strut bracket (short) $9.95
rudderbase.gif (4263 bytes) Rudder base: $8.80
rudderpost.gif (3429 bytes) Rudder post: $6.00
rudderarm.gif (3396 bytes) Rudder steering arm: $6.70
zbend.gif (1861 bytes) 1/16ths Z bend steering pushrod: $1.00
pushrodconn.gif (2906 bytes) Easy pushrod connector: $1.00
Rubber boot push rod seal -
$3.00 a pair
Flex Shaft for K&B 3.5 Outboard - Electric Conversion - $7.95
hughyflex1.gif (2057 bytes) Hughey Type Flex Shaft .125 flex WITH 3/16ths bearing surface and 1/8th cut down stub shaft - $25.00
hughyflex2.gif (2181 bytes) Hughey Type Flex Shaft .125 flex x 3/16ths shaft - $22.00
hughyflex2.gif (2181 bytes) Hughey Type Flex Shaft .150 flex x 3/16ths shaft - $25.00
1/8th stub shaft bored to 1/16th for wire drive - $3.25
3/16ths stub shaft bored to 1/16th for wire drive - $3.25
1/8th Drive Dog - $2.45
3/16th Drive Dog - $2.45
flexhex.gif (2574 bytes) .125 x .130 Octura flex hex motor coupler: $9.95
flexhex.gif (2574 bytes) 5mm x .130 Octura flex hex motor coupler: $9.95
flexhex.gif (2574 bytes) 5mm x .150 Octura flex hex motor coupler: $9.95
teftube.gif (2586 bytes) .130 Teflon tube for flex cables $3.00 a foot
teftube.gif (2586 bytes) .150 Teflon tube for flex cables $3.25 a foot
teftube.gif (2586 bytes) .187 Teflon tube for flex cables $3.50 a foot
siliconetubing.gif (7672 bytes) Silicone cooling hose - $4.50 for 3 feet
New motor mount - $3.95
Motor mount for Graupner 700 series 775 Neo and the SS1: $4.95
hatchtape.gif (10488 bytes) Hatch sealing tape. New rolls, 3 times as long, same great tape.  This stuff is the best!!! $4.50 a roll
battstrap.gif (3245 bytes) Velcro battery tie downs: $1.00
velcro.gif (8786 bytes) Industrial super stick Velcro 2 inches wide: $3.00 a foot.
.
ffebtlt.gif (916 bytes)

  

ffebtrt.gif (911 bytes)
ffetplt.gif (913 bytes) . ffetprt.gif (917 bytes)
.

All prices plus shipping
are subject prior to sale.

For more information, prices, product availability, or to place an order, we can be reached at:

Phone: 623 670 9821
Monday thru Friday 8 am to 8 pm
Sat 8 am to 2 pm
Pacific standard time
Sunday closed

E-mail: fastel1@cox.net
5201 W Camelback Rd.
Space G269
Phoenix, Az. 85031
e-mail is monitored all day for fast responses! Shipping charges may apply.

For our warranty policy click here

 .
ffebtlt.gif (916 bytes)

Created By DRC Web Services

ffebtrt.gif (911 bytes)

*We carry a full line of gear ratios for Hughey Gear Drives.
Contact us for more information.

         

viewcart.gif (1692 bytes) checkout.gif (1699 bytes)

  For shipping information click here.
For our warranty policy click here.